Home
Front panels
Features:
|
Further Information:
|
Powersearch
- Powersearch helps you find the product you need.
- The number of products displayed is reduced as you select technical characteristics.
Front panel unshielded
- Front panel, Al, 2.5 mm
- in various different versions
Front panels shieldable
- Front panel, Al, 2.5 mm, front anodised, rear iridescent green chromated, 2 alignment pins pressed-in, St, stainless
- Shielding with EMC sealing (steel, stainless)
EMC sealing (steel, stainless)
- The EMC seals (steel, stainless) are inserted into the lateral slits of the shieldable front panels (2 pieces per front panel)
Front panels, U profile, shieldable
- High stability through (U profile)
- Front panel, U profile, Al, front anodised, rear conductive, 2 alignment pins pressed-in, St, stainless
EMC sealing (textile)
- Textile EMC gasket is affixed laterally on the front panel or in the groove of the right-hand profile as appropriate.
- Temperature range -40 °C ... +70 °C
Partial front panel, bottom-hinged
- For subracks and cases, can be removed at 135° (subracks, ratiopacPRO and propac cases)
- The usable width is not restricted
Front panel, hinged, shielded
- Assembly on horizontal rails
- Front panel with EMC sealing (textile)
- Hinge can be fitted left or right as desired
Front panels for D-sub connector
- 3 U/4 HP
- Aluminium, front anodised, rear irisdescent green chromated
Front panel for coax connector
- 3 U/4 HP
- Aluminium, 2.5 mm, front anodised, rear irisdescent green chromated
Front panel 3 U with earthing/GND connection
- For earthed front area (protection class 1)
PMC mezzanine front panel with handle, shielded
- PMC= PCI Mezzanine Card
- For module size 149 x 74 mm2
- Conforms to IEEE P1386 specification (CMC= Common Mezzanine Card)
EMC cover plate for PMC mezzanine front panels cut-outs
- EMC cover to close unused cut-outs in PMC Mezzanine front panels
- Material stainless steel, 0.2 mm
- Colour: black or luminous
PMC Mezzanine front panels
- Mezzanine front panel is fitted into PMC front panel cut-outs; EMC shielding is provided via a conductive O-ring
Voltage coding pin for mezzanine cards
- To prevent incorrect insertion of mezzanine boards, coding pins for 3.3 V or 5 V operation are bolted to the VMEbus boards.